Datamax/O'Neil Cigarette Lighter Power Cable for Impact Printers

Datamax/O'Neil Cigarette Lighter Power Cable for Impact Printers.

HP 1.83m 10A C13 Power Cord

HP 1.83m 10a C13 Power Cord (UK)

HP 1.83m 10a C13 Power Cord (UK)

HP C13 to C14 10A Redundant Jumper Cord (2m)

Cables with a C14 plug at one end and a C13 line socket at the other are commonly available, they have a variety of common uses including connecting power between older PCs and their monitors, extending existing power cords, connecting to C13 socket strips (commonly used with rackmount gear to save space) and connecting computer equipment to the output of a UPS (larger UPSs often have C19 outlets as well.)

HP C19 to C20 16A Redundant Jumper Cord (1.2m)

C19 and C20 connectors are oblong with three pins and are rated at 16 A. They are used for some server room applications where higher currents are required. For instance, on high-power servers, UPSs, PDUs and similar datacentre equipment

HP 16a C19 Power Cable (3.6) (Europe)

HP 16a C19 Power Cable (3.6) (Europe).

Cisco Systems 4400 Series WLAN Controller AC Power Supply (redundant)

Air Line Cord United Kingdom Spare

APC Power Cord [IEC 320 C13 to IEC 320 C14]

APC offers power cords (also known as jumper cords), which provide connector options to fulfill a variety of power requirements. Use these power cords to connect your equipment to an APC Rack-Mount power distribution unit (PDU)/outlet strip, MasterSwitch product, Automatic Transfer Switch (ATS), or UPS. These power cords can also be used to connect your APC Rack-Mount (PDU)/Outlet Strip to a power source, such as an APC UPS, ATS, or separate branch circuit.

APC Power Cord (16A 230V C19 to IEC 309)

APC offers power cords (also known as jumper cords), which provide connector options to fulfill a variety of power requirements. Use these power cords to connect your equipment to an APC Rack-Mount power distribution unit (PDU)/outlet strip, MasterSwitch product, Automatic Transfer Switch (ATS), or UPS. These power cords can also be used to connect your APC Rack-Mount (PDU)/Outlet Strip to a power source, such as an APC UPS, ATS, or separate branch circuit.